Leaf Gulp: Product Review

Best Leaf Rakes

When autumn arrives, the leaf-gathering chores begin. And It’s a chore To rake up, and especially to bag, those leaves. The Leaf Gulp makes the chore a bit easier, and sometimes even fun, if that is possible. Raking isn’t really bad, but when it is time to put the leaves in a trash bag, you need two more hands to hold the bag open or you need to lug a garbage can around with you when you work. The Leaf Gulp serves as your next pair of hands, helping you to rake or sweep leaves right into the tote.

See how the Leaf Gulp functions in this movie:

How the Leaf Gulp Works

The product is a made of thick plastic, shaped in a half circle. The Circle retains your bag open so that you may rake or sweep leaves . And each half ring hoop includes two alloy pointed ends that readily push into the ground to maintain the entire bag in place. No more spending time re-opening or pursuing a half-full bag from the wind. Little feet stick within the bag to help fasten it. The leaves are now fast”gulped up” if you rake or sweep them into the bag.

Assessing the Leaf Gulp

I analyzed both dimensions of Leaf Gulps. The Leaf Gulp holds a 39-gallon plastic bag, and the Leaf Gulp II Is intended to maintain paper yard and leaf bags (about 11 by 16 inches). I first used the larger Leaf Gulp to hold a plastic bag for fall garden bed cleanup — to determine how it handled larger things.

I laid the bag out, pushed the metal spikes through the bottom Corners and to the ground, then wrapped the opposite side of this bag over the hoop and fastened it using the included plastic clip. On a really windy day, the tote remained in place on the ground and remained open. I was able to match quite large stalks from green beans and other frost-bitten veggies through the hoop and into the garbage bag.

I used the Leaf Gulp II to rake leaves up from under our apricot tree. The large paper bag held securely in the floor. For the best results, I would suggest using a rake that’s no wider than the mouth of the bag. But even using broader rake, no longer leaves missed the bag than would have fallen out of my hands or a dustpan with picking up a pile to drop into a bag or can.

The Leaf Gulp II worked well at the edge of my patio, where I could sweep the leaves right into the tote. Even though the Leaf Gulp needs ground to secure the small spikes, each patio has an edge. I set mine up on the measures, secured into a gap by the patio border.

With a broom on the patio with all the Leaf Gulp attached to the border worked as well as when it was flat on the ground. In reality, I started thinking about how I felt like a kid at an arcade game, and how this tool could make fall chores more enjoyable for your family.

The Way The Leaf Gulp and Leaf Gulf II Performed

The Leaf Gulp along with the Leaf Gulf II performed as touted. The Pierced corners of the bags stored securely to the floor, even on a windy autumn day. I found them simple to pierce into the ground and the instructions and installation are easy. The only drawback for me was getting the leaves to move into the back of the bag. That’s not a flaw in the goods, just their flat position on the floor.

But unless you are working in a Place with heavily compacted Soil, it just takes a few seconds to pick up the bag from time to time, shake it out to maneuver the leaves to the bottom, and move it closer to another raking location. Though you pierce the corner of the bags to hold them in position, the bags remained intact for me after transferring them.

Yard Force Electric Leaf Shredder (YF8000): Product Review

 When I first saw the Yard Force Electric Leaf Shredder I wondered whether It might really chop up each the leaves in my property into just a couple of piles of organic mulch. So I put it to the evaluation.

By my estimation, the trees in my yard create 6.2 quadrillion leaves each season. Alright, maybe that is more of an exaggeration than a real educated guess.

Each fall, I Must decide what to do with all of the leaves that Drop from the landscaped components of the yard. Since I’ve forests, some seasons I drag them deep into the forest out of sight. Not only does this”solution” create a possible fire hazard, but it takes hours to drag complete tarps of leaves. If I can keep up with the leaves as they drop, I like to mulch the leaves set up together with my riding mower. Unfortunately, the pace at which leaves fall frequently means that the mulch my mower creates completely blankets and kills the grass below. Burning stinks and disturbs my spouse’s sinuses. Bagging leaves by hand and hauling them to the ditch is time-consuming and expensive.

Let us find out!

Specification

  • Weight: 13.5 pounds
  • Bundle Dimensions: 22 x 21.5 x 12.5 inches
  • Height: Adaptive, telescoping legs (1'-3')
  • Starting system: Push button start/stop
  • Power:120V AC (electric cord required) electrical 13 Amp
  • RPMs:8000 RPM
  • Extras: Leaf collectors; substitute lines; security eyeglasses
  • Warranty:2-year limited warranty against manufacturer defects

Initial Impression

Initially, the little package gave me the belief the upstairs Force leaf shredder wasn’t a serious instrument. Thankfully, I was to find that powerful things often hide in small packages.

Bearded G.I. Joe action figure which came outfitted with hand-held weapons and gear. Perhaps fueled by such a scarring catastrophe at such a young age, I now check, double-check, and triple-check bundle contents VERY carefully before sorting and discarding any waste.

Fortunately, the Yard Force Electric Leaf Shredder came with Everything it promised, including the motor casing, funnel, funnel cover, 3 adjustable legs, a removable air filter, replacement lines, safety glasses, and 2 leaf collectors.

Simple Assembly

Flipping through the working manual for pictorial help, I found a Simple graphic explaining how to fit the legs into the molded plastic motor housing.

Once the button pops from the opening, you are aware that it’s secure. To remove the leg, then depress the black button and slide out the leg. It is just that easy.

The telescoping legs reach a height as low as 1′ and as large as 3′ approximately.

The flexible height may accommodate users of a wide stature range. Furthermore, I found it useful when shredding leaves in an elevated bed so that I didn’t have to overextend my own reach.

Next, I attached the funnel into the engine housing. Evidently, the funnel is tapered at the bottom, so you won’t have any difficulty identifying the”skinny” end that sits atop the motor casing. The bottom of the funnel was warped to a somewhat oblong shape, but with a little manipulation, then it fit nice.

After the funnel is clamped into place, set the funnel cover over the top of this funnel. The funnel itself has 8 hard, plastic clips around the sides. Once you’ve placed the cover over the funnel, push it down until all of 8 clips engage to secure the cover to the top of the funnel.

The soft, plastic center material on the funnel cover functions to feed Leaves downwards and protect against shredded items from popping out of the funnel.

Once constructed, I put the device within my garden bed to initiate the test.

And We're Off!

I’m in the process of updating my garden tools to the more Convenient and”greener” power source of rechargeable lithium-ion batteries. But luckily, I have a huge group of heavy-duty outdoor extension cords such as the ones necessary to utilize the Yard Force Electric Leaf Shredder.

For Extra stability, I wound the extension cord around the device, Loosely tying it around itself before plugging it in the cable on the unit.

To operate the unit, there is a easy ON/OFF button in easy-to-see GREEN and RED colour.

Full Disclosure And Safety

I can Attempt to say that I don’t read manuals as a benefit to the Readers, who might not read guides, either. I mean, if a producer can’t create an intuitive, idiot-proof tool without using words, that needs them! For the most part, it’s simple to assemble tools without needing to memorize a manual, but it’s always a fantastic idea to look through the safety warning BEFORE using any instrument.

Anyway, HAD I READ THE MANUAL, I would have worn the supplied safety Eyeglasses, long pants, and a breathing mask, because debris shoots out the unit propelled by a nylon line turning at 8000 RPMs! The shredded leaves do not come out without making quite a mess and dust. After shredding a single funnel filled with leaves, I went into the guide…and then grabbed safety glasses, pants, and a mask.

This should go without saying, but keep anything you value (fingers, Hands, etc.) away from the spinning line. While I do not believe myself overly-cautious, the high-pitched whine of the spinning line convinced me that I didn’t want to learn what would happen should a part of my body violation the funnel cap. At a moment, I will explain to you just how to keep yourself safe when using the machine.

Using The Yard Force Leaf Shredder

To Check the unit, I piled 18 wheelbarrows of leaves near my elevated garden bed. Utilizing the enclosed leaf collectors, loading the shredder is a nice little safety attribute: the tips of the collectors are too big to allow your hands or the collector tips to reach the spinning line, keeping you safe. The collectors arrive with a thin plastic hand strap, but do not anticipate that strap to last long. The first strap broke within 20 loads; the next one broke within 40.

I tried loading the shredder with no leaf collectors, but I Realized immediately that I couldn’t judge how far to push the leaves into the turning point. I improvised a strap using a bit of rope which worked really nicely.

I must mention that you shouldn’t cram or induce the leaves into the Motor housing. This can overload and overheat the engine by jamming up the turning point. Instead of using the leaf collectors, then direct the leaves towards the bottom of the funnel in the feeder.

Three Shredding Preferences

On the side of the device is a slider that allows you to adjust how finely leaves will probably be shredded. You can select:

The Operating Manual states that for best results, shred dry materials. While I did not cycle thatch or grass through the unit, I tried a couple of loads of wet leaves. As you would expect, the moisture on the leaves left the shredded leaf particles sticky, resulting in a leaf”glue” adhering to the surfaces of the engine housing. It is like mowing your yard with the grass is wet; it creates a mess of your mower and leaves your lawn look horrible.

Employing the COARSE setting enables leaves to feed through the unit more Quickly, leaving the leaves bigger; conversely, with the FINE setting slows the feed of leaves, producing smaller leaf fragments. The unit worked great on pine needles.

The engine Produces a high-pitched whine instead of a growl like gasoline-powered tools. I found that this unit silent enough that my spouse and I could hear one another over the noise of the motor.

After using the device for 30-40 minutes straight, I switched off it And noticed two things: one, the motor housing felt quite hot, and 2, the cutting edge lines were worn down to nubs.

Noticing the dark brown and filthy air filter, I pulled it from its Slot on the side of the device. Then I rinsed the foam air filter with water, then allow it to dry thoroughly for one hour to the heating vent within the home, and then replaced it. That partly explained why the unit got sexy: it was not getting enough air.

Unclasping the funnel home and lifting it straight up.

I’d used a combination of this Corona yard rake and also the Yard Force cordless blower To make my foliage pile prior to transporting that pile via wheelbarrow. Apparently, I did not make an attempt to screen out big sticks (and, um, a heavy brass garden hose nozzle).

Cutting Lines Are Simple to Replace

I worried that the traces would be hard to replace, but they were not.

The line has equivalent quantity of length on the two ends. Then feed both ends through the hole onto the rotor unit and pull until they are in their full length.

In no time, I was back to the work of shredding leaves. In total, I stuffed 6 elevated garden beds and 3 large, outdoor refuse containers of shredded leaves, using the unit for nearly 6 hours. With expertise, I have better at pulling the twigs, branches, sticks, and metal nozzles that chew up the lines, therefore the lines lasted more since I learned how to prevent difficulties.

Pros And Cons The Yard Force Leaf Shredder

Are you in the market for a leaf shredder? Here’s what I really liked about the Yard Force leaf shredder.

  • It’s compact – Whenever I bring a new toy or tool home, my wife asks me, “Where are you going to put that?” Fortunately, the Yard Force keeps a small footprint, so it can be stored indoors nearly anywhere when not in use.
  • It’s practical – If you have a garden, you can make your own organic mulch out of free leaves! If you don’t have a garden and plan to shred, bag, and haul off your leaves, the Yard Force allows you to do that, too. Shredding on the FINE setting reduces the volume of leaves significantly (they advertise that the unit reduces 12 bags of leaves down to 1), which can save you money on bags and waste disposal fees. And personally, I feel good that I’m not burning and polluting this year.

Are you in the market for a leaf shredder? Here’s what I really liked about the Yard Force leaf shredder.

  • It’s compact – Whenever I bring a new toy or tool home, my wife asks me, “Where are you going to put that?” Fortunately, the Yard Force keeps a small footprint, so it can be stored indoors nearly anywhere when not in use.
  • It’s practical – If you have a garden, you can make your own organic mulch out of free leaves! If you don’t have a garden and plan to shred, bag, and haul off your leaves, the Yard Force allows you to do that, too. Shredding on the FINE setting reduces the volume of leaves significantly (they advertise that the unit reduces 12 bags of leaves down to 1), which can save you money on bags and waste disposal fees. And personally, I feel good that I’m not burning and polluting this year.

While I didn’t experience any problems with the Yard Force leaf shredder, I put a couple of items on my wish list:

  • A couple of more extras – “No good deed goes unpunished,” right? Had Yard Force not included safety glasses and extra lines in the box, I would never have thought about what more they could do to make my life better/easier. But since they did include them, it’s their own fault. First, I would like to see breathing masks in the box. I didn’t use them initially, and I was blowing leaf particles out of my nose for a week! Maybe most people keep masks on hand, but I had to make a special trip to the store to buy some. Also, I used this unit for a month, which accounts for 80% of the entire North Carolina leaf season. That means I went through almost all of the replacement lines. As soon as the unit experienced a drop in performance, I checked and replaced the line. Give me enough lines to get through a couple of seasons.
  • Quality- Time will tell if the motor has one or several seasons left on its lifespan. The unit functioned well, but some of the molded plastic parts were a bit on the rough side. For example, the funnel housing came in an elliptical shape, meaning it had to be man-handled into a round shape to fit in the motor housing. It’s a small matter, and certainly not one that affected the functioning of the unit. But when I think of a quality tool, I think fit as much as function.

Warranty

Yard Force supplies a 2-year limited guarantee on the leaf shredder against manufacturing defects.

Recommendtion

I enjoy this particular leaf shredder, and I intend to keep it and use it . It’s priced competitively with other similar leaf shredders on the market and gets the job done.

Leave a Comment