There are people who like to get a nice, solid fence around their yard. They like the way the fence surrounds the yard and makes it look complete. Besides, it prevents their dog from going to the neighbor’s backyard and making a mess or even worse; it prevents the dog from becoming involved in a traffic accident. Then again, there are a few fences that can be jumped over or dug under, making them useless. A good solution would be putting up a fence that is taller or creating a concrete groundwork. A better solution is installing a wireless dog fence. These dog fences supply your pet with all the necessary space to roam and leave you without worries. If you’re wondering how to set one up best wireless dog fence , you have come to the perfect place. Let us take a look at how the process goes.
Step 1: Put the Electric Dog Fence Transmitter in the Correct Place
First And foremost, you have to ascertain the design of the fence. It’s the area where your dog can safely roam and play. The transmitter, also referred to as the main unit of the wireless fence, has to be installed in a tactical spot to make the best use of your lawn. A lot of people select a whole-yard layout, but sometimes that’s not the finest option due to the yard form. The setup area of the transmitter will determine the precise location of your containment area; it’ll be in the middle of their pet zone
You Want to watch out for these things when choosing the optimal spot for the transmitter:
- A best-case scenario is to put it near an outer wall and away from concrete ones; concrete walls make the emitted signal poorer.
- Metal appliances should be kept away from the transmitter, minimum 3 ft away.
- It should not be on the second floor of the home; it is better if you keep it on the ground floor, slightly elevated from the ground.
Step 2: Activate The Signal Receiver Collar
Put a working battery in the collar to make it functional. There are models that come with disposable batteries, which usually last for 1 to 3 months and are very affordable. Other models can be recharged directly, or require removable batteries that can be recharged. These collars can hold their own for a few days before recharging. After you get that done, you have to turn the collar on. The last thing you need to do is to approach the signal transmitter with the collar in your hand, press a button and wait for a few seconds until the registration process is finished.
Step 3: Set the Optimal Radius
The Maximum radius could be anywhere between 90 and 250 feet, based on the model of your fence. The process for setting also varies with unique fences.On some fences, you will have to turn a knob on the control unit and on some fences the radius can be set electronically.
Step 4: Set the Right Correction Level
The process involves one of the two approaches:
- On some versions, you need to press the”MODE” button on the collar and wait for a flash. After that, you’ll hear few beeps and the number of beeps signifies the currently set correction amount ( 1 beep = level one, 2 beeps = degree two, etc.). What level you choose depends on how many times you press the MODE button.
- On more advanced models, the correction amount can be set directly from the main control unit, without altering the collar.
Keep in mind not to set the correction amount randomly and refer to the manual for directions.
Step 5: Plant The Training Flags
The final step is planting the training flags. This step will most probably be the longest. You need to do this as follows:
- Take the receiver collar and gradually approach the border zone
- Wait until you hear a beep, stop moving, and plant a flag before you
- Move away from the border and repeat first two measures across the length of the whole zone.
- The flags must be around 7 to 10 feet away from one another
Once You are done with the installation process, it is time for the dog to Get used to the boundaries. All you have to do now is watch your furry Friend run and revel in his new playground.